Next-Gen Nanobubble Technology

Advanced Water Cleaning for
Vehicle Care

Optimize water quality and cleaning performance in vehicle care systems with the NICO DRONA Nanobubble System.

Integrating nanobubble technology into car wash and vehicle cleaning systems enhances water quality, cleaning cleaning efficiency, and operational stability. Ultra-fine nanobubbles enable deeper penetration and more effective contaminant removal.

The result is superior cleaning performance, reduced chemical usage, improved water efficiency, and more consistent results across vehicle care operations.

The NICO DRONA Advantage

The NICO DRONA Nanobubble System enhances vehicle cleaning performance by improving the removal of grease, oil, and dirt through ultra-fine nanobubbles. It enables better surface penetration, boosts foam efficiency, and delivers more effective cleaning.

It integrates with car wash systems, detailing stations, and water recycling loops for superior cleaning with reduced water and chemical use.

> 85% Gas Transfer Efficiency
< 200nm Bubble Diameter
The NICO DRONA

Key Application Areas

Enhancing automotive cleaning systems and water performance with
advanced nanobubble technology.

Touchless exterior

Touchless exterior
washing

Enables effective cleaning without contact by lifting dirt and contaminants from surfaces.

Foam enhancement

Foam enhancement
& cling

Improves foam stability and adhesion for deeper, longer-lasting cleaning action.

Degreasing

Degreasing
applications

Breaks down grease and oil for more efficient surface cleaning.

Process

Wheel & brake
cleaning

Removes stubborn brake dust and grime for a cleaner finish.

Mineral flotation

Final rinse &
spot reduction

Minimizes water spots for a streak-free, polished look.

Zero Liquid Discharge

Water recycling
systems

Enhances water treatment for efficient reuse and reduced consumption.

Key Benefits

Measurable improvements in cleaning performance, water efficiency, and
overall vehicle care system effectiveness.

View Case Studies View case Studies
Enhanced Water Treatment
Enhanced Cleaning
Performance

Improves removal of grease, oil, and road contaminants with reduced chemical usage.

Optimized Mineral
Optimized Foam &
Surface Coverage

Enhances foam stability and ensures better coverage for deeper cleaning results.

Environmental Management
Improved Water Quality &
Efficiency

Delivers better rinse quality, reduces water spots, and supports water recycling with lower consumption.

Improved Effluent
Operational Flexibility &
Hygiene

Controls odors and performs effectively across both automated and manual detailing systems.

Technical Specifications

Choose the right NICO DRONA model to enhance cleaning efficiency and water performance in your vehicle care systems.

Models Units NICO DRONA 01 NICO DRONA 05 NICO DRONA 10 NICO DRONA 30 NICO DRONA 100
Flow Rate m³/hr 1.35 5 10 30 100
LPH 1350 5000 10000 30000 100000
System Pressure bar 2 2-3 2-3 2-3 2-3
Nanobubble Size nm 50-200 50-200 50-200 50-200 50-200
Zeta potential mV up to -43 mV up to -43 mV up to -43 mV up to -43 mV up to -43 mV
Gas usage Air, Oxygen, Ozone
Oxygen Flow Rate LPM 1.5 7 14 40 133
Oxygen Pressure PSI >7 >7 >7 >7 >14.5
Ozone Flow Rate GPH 3-5 16 70 200 600
Oxygen Pressure PSI < 1.1-1.2 < 1.1-1.2 < 1.1-1.2 < 1.1-1.2 < 1.1-1.2
Suction Line Size inch 1.5 1.5 2.0 3.0 4.0
Discharge Line Size inch 1.0 1.0 2.0 3.0 4.0

*NICO DRONA 20, 50, 250, 500, 1000 systems available, with configurable specifications based on application requirements.

Frequently Asked Questions

How do NICO Nanobubbles improve vehicle cleaning efficiency?

NICO Nanobubbles enhance the water's solvency, allowing it to penetrate deep into microscopic surface crevices. Their high internal pressure (up to 30 bar) and negative surface charge help physically lift dirt and grime more effectively than standard water, providing a "scrubbing" action at a molecular level.

How does NICO VANTA improve product quality and processing efficiency?

By generating ultra-fine nanobubbles, it enhances gas–liquid interaction, improves dissolved oxygen and CO₂ control, supports better carbonation and fermentation, and boosts cleaning and sanitation performance.

What are the key benefits of using nanobubble technology in food and beverage systems?

It improves product quality and shelf life, enhances hygiene, reduces biofilm formation, increases processing efficiency, and integrates easily with existing food processing systems.

Upgrade Your Vehicle
Cleaning Technology